SUN-FIX Epoxy Adhesive, AQUA
SUN-FIX Epoxy Adhesive, AQUA
SUN-FIX Epoxy Adhesive, AQUA
Product Description
| Features |
| ● Provides a fast, durable, and permanent solution for all types of applications on wet, damp surfaces and even underwater. |
| ● Effective for sealing cracks and holes, stopping leaks, and repairing surface damage. |
| ● Suitable for use in fuel and water tanks, radiators, electrical panels, plumbing applications, and swimming pools. |
| ● Once cured, it can be mechanically processed, drilled, sanded, and painted without the need for a primer. |
| ● Resistant to gasoline, oil, esters, saltwater, and most diluted acid solutions. |
| ● Provides excellent adhesion to metal, aluminum, cast iron, stainless steel, rigid plastics, rigid PVC, glass, ceramics, natural stone, marble, brick, and concrete. |
| ● Provides moderate adhesion to fiber-reinforced materials (GFRP, CFRP, fiberglass), wood, plywood, and MDF. |
| ● Not suitable for use with rubber and elastomers. |
| Surface Preparation |
| ● For optimal adhesion, surfaces must be clean and free from grease. |
| ● Foreign materials and loose particles must be removed, and the surface should be roughened with suitable sandpaper if possible. |
| ● After mechanical abrasion, the surface must be cleaned of loose particles. |
| Application |
| ● The product is two-component and the components are concentric. |
| ● Cut off the required amount of material. |
| ● Mix both components until a homogeneous color is achieved. |
| ● To ease mixing and reduce viscosity, the putty can be warmed to room temperature prior to application. |
| ● Apply quickly to the surface to be bonded or filled. |
| ● In each application, gaps up to a maximum of 15 mm can be filled; larger gaps can be filled through multiple applications. |
| ● Application time is based on a 10 g mixture at room temperature (20°C). |
| ● Preparing larger quantities will shorten the curing time. |
| ● An increase in ambient temperature accelerates the curing process. |
| ● Temperatures below +16°C significantly extend working and curing times. |
| ● At temperatures below +5°C, no reaction occurs and the mixture will not cure. |
| Technical Specifications |
| ● Color after curing: White |
| ● Mixing ratio (resin / hardener): 1:1 |
| ● Max. gap filling: 15 mm |
| ● Application temperature: +15 to +40°C |
| ● Curing temperature: +6 to +40°C |
| ● Working time (10 g mixture, 20°C): 10 min |
| ● Hand-tight strength (35% strength): 30 min |
| ● Mechanical load capacity (80% strength): 60 min |
| ● Full cure (100% strength): 24 hours |
| ● Compressive strength (DIN EN ISO 604): 76 MPa |
| ● Adhesion strength (DIN EN ISO 4624): 10 MPa |
| ● Adhesion strength underwater (DIN EN ISO 4624): 5 MPa |
| ● Hardness (Shore D; DIN ISO 7619): 86 |
| ● Hardness underwater (Shore D; DIN ISO 7619): 79 |
| ● Temperature resistance: -50°C to +120°C, short-term up to +150°C |
| Storage |
| ● Shelf life is 18 months when stored unopened in a dry environment at room temperature (approx. +20°C). |
| ● Keep away from moisture and direct sunlight. |
| ● Shelf life may be reduced if stored under conditions outside those specified above. |
| ● Storage below +5°C or in environments with continuous temperature fluctuations may cause crystallization. |
| ● Crystallization caused by improper storage or transportation conditions can be eliminated by heating (max. +50°C). |
| ● Once opened, the shelf life is reduced. |
