SUN-FIX Liquid Epoxy Adhesive, PLASTIKBOND
SUN-FIX Liquid Epoxy Adhesive, PLASTIKBOND
Two component fast curing plastic adhesive with high tensile and shear strength
Product Description
| SUN-FIX Liquid Epoxy Adhesive, PLASTIKBOND |
| General Features |
| ● High tensile and shear strength, fast-curing, two-component plastic adhesive |
| ● Provides excellent adhesion especially on rigid plastics (PVC, ABS, fiberglass) |
| ● Suitable for bonding rigid plastics to each other or to materials such as aluminum, steel, ceramic, glass, natural stone, etc. |
| ● Resistant to impact; suitable for both static and dynamic loads |
| ● Maximum gap-filling capacity of up to 5 mm |
| ● High viscosity ensures excellent adhesion performance even on vertical surfaces |
| ● Suitable for automotive bumper repair, bodywork repair, and mirror bonding |
| ● Ideal for repairing headlights and tail lights, as well as all metal parts of vehicles |
| ● Apply within 10 minutes; begins to set in 4–6 minutes and can be sanded and painted after 60 minutes |
| Surface Preparation |
| ● For optimal adhesion, surfaces must be clean, dry, and free of grease; mechanical roughening (e.g., sanding) is recommended |
| ● Remove dirt, loose particles, and contaminants; surfaces must be clean and dry |
| ● Apply quickly to only one side of the surface to be bonded or filled |
| Application |
| ● Dispense equal amounts of both components by pushing the dual cartridge through both nozzles |
| ● Mix thoroughly until a homogeneous color is achieved |
| ● Apply quickly to only one side of the surface to be bonded or filled |
| ● After opening, discard the first 5 cm of material due to possible inconsistencies in reused cartridge tips |
| ● Pot life refers to a 10 ml mixture at room temperature; larger quantities will result in faster curing |
| Technical Data |
| ● Type: Liquid epoxy |
| ● Color after curing: Milky white |
| ● Mixing ratio (resin / hardener, automatic): 1:1 |
| ● Density of mixture: 0.98 – 1.02 g/cm³ |
| ● Viscosity of mixture: 40,000 – 60,000 mPa·s |
| ● Max. gap-filling capacity: 5 mm |
| ● Processing temperature: +10°C to +40°C |
| ● Curing temperature: +18°C |
| ● Pot life (10 g mixture, 20°C): 10 minutes |
| ● Handling strength (35% strength): 40 minutes |
| ● Functional strength (50% strength): 60 minutes |
| ● Final strength (100% strength): 12 hours |
| Mechanical Strength of Cured Epoxy |
| ● Lap shear strength (DIN EN 1465, thickness: 1.5 mm) |
| Sandblasted steel (1.0338): 23 MPa |
| Sandblasted stainless steel (V2A): 22 MPa |
| Sandblasted aluminum: 20 MPa |
| Rigid PVC (roughened): 12 MPa |
| CFRP (carbon fiber reinforced plastic): 22 MPa |
| ABS: 7 MPa |
| PC (polycarbonate): 11 MPa |
| GFRP (glass fiber reinforced plastic): 21 MPa |
| PMMA (acrylic): 9 MPa |
| Polyamide 6.6: 1 MPa |
| ● Temperature resistance: -55°C to +125°C |
| ● Dielectric strength (DIN EN 60243-1, 20°C): 21 kV/mm |
| Storage Conditions |
| ● Shelf life is 12 months when stored unopened in a dry environment at +18°C to +25°C |
| ● Protect from moisture and direct sunlight |
| ● Shelf life may decrease to up to 6 months under improper storage conditions |
| ● Storing opened products in a cool environment helps extend shelf life |
