SUN-FIX Liquid Epoxy Adhesive, TRANSPARENT
SUN-FIX Liquid Epoxy Adhesive, TRANSPARENT
Transparent self leveling adhesive that retains elasticity after curing
Product Description
| Features |
| ● Two-component, high temperature resistant, fast-curing, high-strength epoxy adhesive. |
| ● Features a very short pot life and a fast-curing structure. |
| ● Temperature resistant up to +180°C and self-leveling. |
| ● Provides mechanically strong, impact-resistant bonds thanks to its high tensile and impact strength. |
| ● Suitable for use on a wide range of materials including metal, plastic, fiber-reinforced materials, ceramics, glass, stone, and wood. |
| ● Offers a wide range of applications in industrial uses, glass applications, and DIY (Do-It-Yourself) applications. |
| ● Resistant to chemicals and diluted acid solutions. |
| ● Pot life is based on approximately 10 ml of material at room temperature. Larger quantities will result in faster curing. |
| ● Higher temperatures reduce both pot life and curing time. Each +10°C increase above room temperature approximately halves the pot life and curing time. |
| ● Temperatures below +16°C significantly increase pot life and curing time. |
| ● At approximately +5°C and below, no reaction occurs. |
| Surface Preparation |
| ● For optimal adhesion, surfaces must be clean and free from grease. |
| ● Foreign materials and loose particles must be removed, and the surface should be roughened with suitable sandpaper if possible. |
| ● After mechanical abrasion, the surface must be cleaned of loose particles. |
| Application |
| ● Dispense equal amounts of both components by pushing the dual cartridge through both nozzles. |
| ● Mix both components until a homogeneous color is achieved. |
| ● Apply quickly to only one side of the surface to be bonded or filled. |
| ● After opening and reusing the cartridge, discard the first 1 cm of extruded material as the components may have been affected by different exposure conditions. |
| ● Pot life is based on approximately 10 ml of material at room temperature. Larger quantities will result in faster curing. |
| Technical Specifications |
| ● Color after curing: transparent, light yellow |
| ● Mixing ratio (resin / hardener – automatic): 1:1 |
| ● Viscosity of mixture: 4,500 mPa·s |
| ● Max. gap filling: 2 mm |
| ● Application temperature: +15 to +40°C |
| ● Curing temperature: +6 to +40°C |
| ● Working time (10 g mixture, 20°C): 4–5 minutes |
| ● Handling strength (35% strength): 15 min |
| ● Mechanical load capacity (80% strength): 30 min |
| ● Full cure (100% strength): 24 hours |
| Strength of Cured Epoxy Resin |
| ● Tensile strength (DIN EN ISO 527-2): 50 MPa |
| ● Elongation at break (DIN EN ISO 527-2): 2.7% |
| ● Compressive strength (DIN EN ISO 604): 55 MPa |
| ● Flexural strength (DIN EN ISO 178): 58 MPa |
| ● Hardness Shore D (DIN ISO 7619): 83 |
| ● Temperature resistance: -50°C to +180°C |
| Storage Conditions |
| ● Shelf life is 18 months when stored unopened in a dry environment at room temperature (approx. +20°C). |
| ● Keep away from moisture and direct sunlight. |
| ● Shelf life may decrease to up to 6 months if stored under conditions outside those specified above. |
| ● Storage below +5°C or in environments with continuous temperature fluctuations, as well as transportation under winter conditions, may cause crystallization. |
| ● Crystallization caused by improper storage or transport conditions can be eliminated by heating (max. +50°C). |
